Geometric DFMPro 4.2.1-4.6.1 for ProE WFCreo (x86x64)

[center]
http://keepimg.com/images/bBvspTgLqjYGo15BPGTYGzsWrgWnGB0S.jpg
[/center]

[center]
File size: 881 MB
[/center]

Geometric's DFMPro, a CAD-integrated design for manufacturing solution helps you identify and correct downstream issues early in the design stage, leading to reduction of cycle time and, in turn, resulting in high-quality products with lower product development costs.

DFMPro is a powerful Design for Manufacturability & Assembly (DFM/A) software, fully integrated inside CREO Parametric. It helps designers to check their designs for manufacturability and assembly within CREO and Pro/ENGINEER and take corrective actions without multiple rounds of design iterations. It generates results in interactive 2D and 3D reports for easier analysis and design for manufacturing collaboration.

Seamlessly integrated within Creo, it allows you to
Eliminate rework due to manufacturing and assembly errors downstream
Run DFM checks at the click of button within CREO and Pro/ENGINEER, plus edit and update the design without leaving the CAD environment.
Use DFMPro for common manufacturing processes like plastic injection molding, sheet metal, machining (Turning, milling & drilling) and assembly operations

New in DFMPro 4.2.1
Bend Relief
Closed Hem Parameters
Closed Hem with a Bend Parameters
Countersink Hole Distance To Form
Emboss Distance to Cutouts
Emboss Spacing
Emboss To Bend Distance
Emboss To Part Edge
Emboss With Extruded Hole Parameters
Extruded Form Spacing
Extruded Form To Bend Distance
Hem Distance To Cutouts
Hem Distance To Bend
Hem Distance To Form
Hem Spacing
Non Uniform Bottom Radius
Shut-off Parameters
Recommended Bottom Radius for Lip

New in DFMPro 4.6.1:
The highlights of the latest release of DFMPro include:
Functionalities
DFMPro now remembers import selection information on Import or Rerun.
Instead of re-entering multiple pulling direction data and mold wall classification
on complex parts at the time of repeating an analysis, DFMPro now remembers
these integral details. User would also be notified of modification or deletion on
running a new analysis with a previously selected pulling direction.
Grouping Results is now supported for Injection Molding and Casting module.

The latest release of DFMPro for Creo Parametric also lets user import bulk
data into rule configuration. This functionality supports the following rules-
Fastener Clearance
Fastener Engagement Length
Standard Hole Sizes
Captured images now appear in a separate column

[center]
Download Link Rapidgator.net

Код:
http://rapidgator.net/file/357ef95107fd031ff1716a69e292834a/mumb8.Geometric.DFMPro.4.2.14.6.1.for.ProE.WFCreo.x86x64.rar.html

[/center]